Articles

This is one of my earliest electronics project: An alarm clock built around an Arduino nano, a real-time clock (RTC) module and a 7-segment display.

I found a cheap 4 wheel drive chassis on eBay and decided to make a remote controlled robot out of it. Thus, I made a simple board with two H-bridge modules, an NRF24L01 wireless module and Arduino pro mini.

While at university, two friends and I registered as a team for the <a href="https://robot-competition.epfl.ch/" rel="noopener noreferrer nofollow">EPFL robots competition</a>. The objective of the competition is to build a robot that would collect PET bottles inside an arena and bring them back to a collection area. We figured the robot would need to be designed with a storage space as well as some form of path finding algorithm if we wanted it to be able to carry bottles to the collection area so decided to simply skip the step. Instead, we designed the robot as a bottle cannon that would shoot the bottles in the collection area.

When I was a university student, drones were starting to get popular so I decided to make my own. I made two attempt at the idea: The first attempt involved designing the most of drone from scratch, its mechanical design as well as its electronics, including the remote controller. After that attempt proved less than satisfactory, I designed a new version of the drone, this time with off the shelf electronics.

When I was in the army, we would often have exercises where we need to setup some equipment in the field and establish a security perimeter around to prevent access from unauthorized personnel. During those exercises, the sergeants and lieutenants would sometimes disguise themselves as enemies and try to access the equipment to see how successful we would be at stopping them. I didn't like the idea of staying alert for long periods of time and instead wanted to receive some kind of warning whenever a superior would be arriving in our vicinity so I designed a GPS tracker that I intended to put on his car.