Articles
HDD preparation
Here are the steps to prepare a brand new hard drive and install a file system on it.
Using v-for or v-if on multiple elements
Items to which <code>v-if</code> or <code>v-for</code> apply can be grouped inside <code><template></code> tags. For example:
ESP32-CAM firmware
The ESP32 supports ov2640 cameras, which makes it an ideal platform for a DIY IP camera. For this purpose, I wrote a customized firmware for the ESP32 which provides the following features:
Mosquitto
Mosquitto is an open source message broker that implements the MQTT protocol. It is lightweight and is suitable for use on all devices from low power single board computers to full servers.
connect-history-api-fallback ignore certain routes
For example, if the route /file needs to be handled by express and not the single page application:
Raspberry Pi based NAS
This is a simple Raspberry Pi based NAS. Tt features, as the name suggests, a Raspberry Pi as well as a 1TB 3.5'' HDD, interfaced with a USB to SATA converter.
Arduino 7-segment alarm clock
This is one of my earliest electronics project: An alarm clock built around an Arduino nano, a real-time clock (RTC) module and a 7-segment display.
4WD robot
I found a cheap 4 wheel drive chassis on eBay and decided to make a remote controlled robot out of it. Thus, I made a simple board with two H-bridge modules, an NRF24L01 wireless module and Arduino pro mini.
PET bottle collecting robot
While at university, two friends and I registered as a team for the <a href="https://robot-competition.epfl.ch/" rel="noopener noreferrer nofollow">EPFL robots competition</a>. The objective of the competition is to build a robot that would collect PET bottles inside an arena and bring them back to a collection area. We figured the robot would need to be designed with a storage space as well as some form of path finding algorithm if we wanted it to be able to carry bottles to the collection area so decided to simply skip the step. Instead, we designed the robot as a bottle cannon that would shoot the bottles in the collection area.
A DIY quadcopter drone
When I was a university student, drones were starting to get popular so I decided to make my own. I made two attempt at the idea: The first attempt involved designing the most of drone from scratch, its mechanical design as well as its electronics, including the remote controller. After that attempt proved less than satisfactory, I designed a new version of the drone, this time with off the shelf electronics.